OK, so how do I clean the fuel distributor (yes take it off, replace the hoses (those are relatively cheap)... How about getting any rust off of the bolts with the holes in them? What solvent do I use for the hoses? Any reason that I cannot use standard fuel hoses that you can buy at a place like Checker? Cutting them to length should suffice... How about the warm up regulator? Already cleaned out the tank (ie wiped her out) replaced the pump, boot, cover, fuel filter... which is where i found some rust in the bolt that has holes in it. Sean 3372 --- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> wrote: > > Many of the parts in the fuel system are rebuildable. Not the > accumulator, but most of the others. Before you buy one of these > expensive parts (which you get no credit for your old one) see if you > can send them out to be rebuilt. Check with John Hervey. The fuel > distributer is cleanable in most cases. If the distributer is messed > up you probably need to do EVERYTHING. You might have to make a pile > of all the fuel system parts including the fuel injectors and send it > all out. The hoses you should be able to clean up with bottle brushes > and solvent. If the distributer is dirty you should start in the fuel > tank. Pull the pump and the sending unit, drain the tank, and wipe it > out finishing up with an acetone wipe. Replace any deteriorated or > questionable parts. The holes are called ports and there is no > "cheaper" cross-referance. You do have to be careful to get the > "right" parts. Each part has a long Bosch part # on it. If it is not > EXACTLY correct then the part will not be correct for use in a Delorean. > David Teitelbaum > vin 10757 > > > > > --- In dmcnews@xxxxxxxxxxxxxxx, "seanhagan" <seanhagan@> wrote: > > > > Was speaking to someone, and he stated that I probably need to get a > > new fuel distributor to fix my current fuel problems. While I know > > that most of the Delorean parts sites list a fuel distributor, I was > > wondering if there was perhaps a cheaper cross reference somewhere out > > there that I could use... Not that I am cheap, but since, i probably > > need to replace the warm-up regulator, the accumulator, as well as the > > injectors I was wondering if there was something else that worked just > > a > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/