[DML] Re: 5-speed problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: 5-speed problem



The first thing you should try to do are the adjustments on
F:07:01-:02. If you see any lost motion you may have to replace some
rubber bushings if they are worn out. Check the fluid level too.
Generally if there is a problem with the notorious pin it doesn't
affect 4th but it WILL affect 2nd. You don't remove the console, just
the plate over the top. Remove the 2 screws towards the rear, the
shiter knob, and it may be stuck under the plastic lense in front but
with some gentle persuasion it will come out. While you are under the
car inspect the motor mounts for cracks, especially the front left one
on the tranny.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "mydmc5898" <mydmc5898@...> wrote:
>
> My 5-speed tranny was put in around last January or so. 
> It ran fine until July, when the car refused to go into reverse.
> 








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated