[DML] Turn Signal Snapback function
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Turn Signal Snapback function



I recently had to replace the turn signal appratus, as the wiperswitch 
control arm had been broken. I purchased a new setup from one of the 
vendors along with the lower portion of the steering column, and have 
found that when I put back on the wheel, (it was off by about 20 
degrees at the time) that the snapback function did not function. I 
thought that this was normal, although now that I look back it used to 
work. Initially I thought it was due to the fact that the steering 
wheel was off at the time. I pulled the steering wheel again, and 
straightened it out (now I am only off by about 5 degrees now) Did I 
miss something when I put the turnsignal/wiper control arm appratus 
on? I did not have any leftover parts when complete. Is there 
something I need to hook to the steering wheel itself? 

Thanks
Sean







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated