RE: [DML] Minimum rotor thickness?

["Kevin Milliken" <kevin.milliken@xxxxxxxxxxxxxx>]

Hi Lingo

The size is 12.7mm it is printed on the edge and the workshop should see
this and
not machine them past thickness.

Regards


Kevin

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of Robert Lingo
Sent: 25 October 2005 04:19
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Minimum rotor thickness?


If memory serves me, not well by the way, I believe it's 7mm.  I know it's
printed on the rotors if I'm wrong about the 7mm.  I just had mine turned
for the last time because I'm down to minimums now.

Lingo
#2034


----- Original Message -----
From: "o0shoryuken0o" <dmc06976@xxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, October 24, 2005 1:12 PM
Subject: [DML] Minimum rotor thickness?


> does anyone know
> what the minimum thickness should be?





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links












To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/