[DML] Separating fuel lines
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Separating fuel lines



The archive search engine isn't the best. I know this question has 
been asked but I can't find the answer.

I'm replacing the flexible lines from the fuel pump to the metal lines.
The line nuts unscrewed without any trouble. The metal fittings in the 
flexible hoses will not separate from the tips of the metal lines.

Using heat near the fuel system is out of the question.
PB Blaster isn't working.
Vibration would be better, but space is too limited. 

Any suggestions?

Thanks,
Rich A.
#5335








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated