[DML] idle speed regulator

[Ed Kane <wingnut702001@xxxxxxxxx>]

I just got my car less than 2 weeks ago.  Ive done alot of reading out of the dmc workshop manual.  My question is with the idle.  I know these cars idle up and down.  From what i understand, the idle speed regulator has alot to do with this,  I also read that the electronic idle system is only in use when the micro switch is fully opened or closed.  When it is fully opened or closed then the computer tells the idle speed regulator to open or close for more or less air flow.  what would happen if i was to pull the plug on the speed regulator when the car was at the correct idle.  Would that stop the changing idle speed.  I know this could also be caused by vaccum leaks, but just out of curiosity, if there where no vaccum leaks, would this help the problem.  Or what would happen if u pulled the plug on just the mirco switch.  One other question,  I know when u start your car up when it is cold it goes to a higher rpm.  Like it has an electric choke.  Would pulling the plug on the idle
 speed regulator stop this too.  I don't know about anybody else, but if my car has been sitting for a week i dont want it firing up at 2,000 rpms when the engine has had no oil flow.  Thanks

 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/