[DML] Re: Followup on transmission flange seal fix

["ksgrimsr" <knut.s.grimsrud@xxxxxxxxx>]

Thanks for the insights.

36mm sounds familiar... I'll have to check my toolchest when I get 
home, but that wouldn't by chance be the same size as the spindle nut?

   Knut


--- In dmcnews@xxxxxxxxxxxxxxx, "stainlessilusion" <5n-@xxxx> wrote:
> I believe it's 36mm. I got mine at advance auto, both impact and 
> regular 36mm sockets. Haven't tried to pull the pulley, I needed the 
> socket to turn the crank, was planning on replacing the seal behind 
> the pulley but turned out to be something else leaking so I never 
had 
> to pull the pulley. I'm sure you'll need a puller though. I have yet 
> to work on an [undamaged] engine where the crank pulley just slides 
> right off. -----Dani B. #5003









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/