[DML] Re: Dry Injector connection
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Dry Injector connection



It is possible you have a very slight leak on that port. It could be a
leaking fuel injector, a leaking seal, or maybe the pressure gauge you
installed. Move the pressure gauge over to another spot and see if the
same thing happens, I would suspect the pressure gauge first.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "drdhdmd" <doctorDHD@xxxx> wrote:
> OK so I finally ran out of excuses and decided to tackle my leaking 
> water pump. I have just disconnected the fuel injector lines from the fuel distributor and noted that all the connections were wet with gasoline as would be expected, except for the line going to FI #1.  That well in the FD was dry as a bone.




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated