[DML] Re: Engine Temperature Gauge Sender

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

The sending unit for the temp gauge is on the front edge of the right
side cylinder head. You can remove the engine cover for easier access.
Why are you trying to remove it? They do not seem to fail often but
the wiring is often the problem. Remove the wire, clean the connection
and try again. It may work. If the trouble is not with the wiring it
is more likely the gauge unit itself is the problem. Try grounding the
sensor wire momentaraly. It should peg the gauge. If it doesn't check
the wiring and then the gauge unit.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, Mike Hirko <jhirkojr@xxxx> wrote:
> Does anyone have advice on how to get at the sending
> unit for the engine temperature gauge?




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/