Did the flex-plate get damaged in the process? Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle@xxxx> wrote: > I've been chasing down a mysterious noise from my recently-re- > installed engine in my automatic project car. All I did to the trans > was replace the torque converter seal and some general clean-up, new > gaskets, o-rings, etc. > > The problem I'm having is a hellacious noise from, apparently, within > the torque converter. It sounds a lot like a dry scraping noise, in > fact first we thought maybe oil starvation in the engine somewhere. > I've now gotten under the car while running on a lift and it's > definitely the converter. The other related, odd symptom is that, > with the engine off, trans in-gear, turning the axles (together) > causes what sounds like a gurgling noise in the coverter itself. > Obviously in the process of changing the seal the converter was off > the trans and most of the oil ran out of it. So - it seems that the > converter is full of air as well as fluid. The car does drive OK, it > just makes this very scary noise that could well be a much louder > version of the gurgling noise that I can get with the engine off. > > Is there something that I should be doing to bleed the converter? Is > this a symptom of some greater problem? I've been into a few non- DMC > automatics and never seen anything like this. > > Dave Swingle To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/