Re: [DML] Oxygen Sensor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Oxygen Sensor



Jason --
Just went thru that, drop that half shaft axle (transmission end) and tie it 
up out of the way, don't let it hang down, then use a 22mm end wrench and 
pull like hell on it, it will come out. Having the axle out of the way gives 
a lot more room to work and saves some skinned knuckles.
Lloyd--#3502

----- Original Message ----- 
From: "Jason" <rowejj@xxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, May 22, 2005 4:10 PM
Subject: [DML] Oxygen Sensor


>    Hello All,
>                   While replacing my fuel filter today I thought I might
> go ahead and try and tackle the oxygen sensor AGAIN!  Does any-
> one have any tips or tricks to get this thing out? I have tried an
> oxygen sensor socket but there isn't enough room to get the socket
> wrench on it when I get the socket on. I have also tried a 7/8 wrench
> but I can't get on it enough due to the axle. Any other ideas? Would
> it be easier to drill and tap a new spot to put the new sensor? It seemed
> like a fairly easy job to do. It may also be the original one to so that
> might mean that it has welded itself in pretty good by now. If anyone
> has any tip or tricks I would appreciate it.
>
>                                 Thanks in advance..........Jason    #5903
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
>
> For more info on the list, tech articles, cars for sale see 
> www.dmcnews.com
>
> To search the archives or view files, log in at 
> http://groups.yahoo.com/group/dmcnews
> Yahoo! Groups Links
>
>
>
>
>
> 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated