[DML] re: Manual Trans Seal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] re: Manual Trans Seal



Yes

You can take that back cover #54 off the trans in the car and replace 
it like that. Drain the trans. Remove the shift linkage and then the 
transmission mounts so that the trans can be lowered. The engine will 
hit the back wall (or the exhaust will hit the facia) and stop, no 
need to support anything. Once that cover is off the car you'll have 
to knock out a couple of roll pins (4/1/4 #5) to get the shaft out. 

I've never seen that seal fail or leak - it's far above the static 
oil level of the trans. Also replace gasket #57.

BTW - from this point to removal of the transmission from the car, is 
removal of the axles, the clutch line, and 4 bellhousing bolts/3 
starter bolts. And some muscle power or a good trans jack.

Dave
----- Original Message ----- 
From: "stainlessilusion" 
Subject: Manual trans seal


Is it possible to replace lip seal #103049 (4-1-1 #52) on the manual
transmission without removal/disassembly? -----Dani B. #5003









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated