-- Well I put it back together again and it made noise for a few minutes of running then quitted up... It almost sounded like the new throw out bearing was squeaking.. but i turned every thing be hand before I put it back together and nothing made a sound..there were no rubbed spots on the flywheel or the pressure plate or anything.. I dont know what the hell is going on with this but it seems to be alright now for some reasone.. any suggestions? I will try driving it tomorrow after i hook up the axels and such.. thanks..Dave..vin 15275 - In dmcnews@xxxxxxxxxxxxxxx, Warren Wallingford <warren@xxxx> wrote: > The flywheel won't be out of balance-the 'clock' position doesn't > matter. If it did, there wouldn't be but one way to put it on. The rear > main seal and/or carrier may not be installed correctly. Also, you have > discovered one of the secrets of the professional mechanic: Repetition > teaches speed. Do a job two or three times and it gets easier and faster. > Warren at DMC > > painterdave72 wrote: > > --- In dmcnews@xxxxxxxxxxxxxxx, Warren Wallingford <warren@xxxx> wrote: > > > > Hey Warren and others I took the trans back out this evening.. only took a half > > hour this time... I turned the flywheel and it made a rubbing noise for a few > > turns and then stopped.. whats up with that?? im gonna take it back off > > tomorrow and see what the hell is going on.. is it on wrong?? i marked it when > > I took it off and put it back on the same way so I dont know.. Thanks for > > help..Dave...vin..15275 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/