Re: [DML] So let's quiet this baby down...
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] So let's quiet this baby down...
- From: Boo who? <liljon_2001@xxxxxxxxx>
 
- Date: Thu, 14 Apr 2005 18:35:56 -0700 (PDT)
 
There are alternatives.  I wouldn't recommend Ice
Guard.  It is a roofing material and it has a grainy
side.  I have heard of people using it but I wouldn't
recommend it.  The one "legit" alternative is Be-Quiet
http://www.b-quiet.com/index.html
I used it in my Toyota pick-up doors around new 6 1/2
speakers.  Works well but it will add a little weight
to the door.  Don't THINK it will pose any problems
with your D.
Hope that is helpful Pat.
--- Patrick Conlon <PRC1216@xxxxxxx> wrote:
> 
> 
> I have often thought about Dynamating the entire
> floor of the car to see how
> quiet I can make it.  It would be pretty pricy, but
> I think it would work
> wonders.  I used it on the rear wall of the car by
> sticking it on the other
> side of the carpeted board, and it quieted the
> engine noise down in my early
> '81 a lot.  I bought it at Best Buy in the car
> stereo department, and
> apparently in the booklet that came with it they
> have a spray to get in hard
> to reach areas to block noise.  I also had a rattle
> in my passenger door
> that I could not get out to save my life, so I took
> off the interior panel
> and put dynamat on the other side of that.  It
> quieted down the door, and
> didn't appear to affect its opening at all, which
> was surprising.  I thought
> it would weight the door down, but it still flies
> up.  Eventually I found
> the rattle was the door lock rod for the exterior
> lock going through a
> rectangular opening inside the door was rattling.  I
> adjusted the linkage,
> and then I shot some rubber undercoating on that rod
> and around the opening
> in the door, and it quieted it down almost
> completely.
> 
> Good luck, it can be a quiet car.
> -Patrick C.
> 1880
> 
> 
> 
> 
> 
> 
> To address comments privately to the moderating
> team, please address:
> moderators@xxxxxxxxxxx
> 
> For more info on the list, tech articles, cars for
> sale see www.dmcnews.com
> 
> To search the archives or view files, log in at
> http://groups.yahoo.com/group/dmcnews 
> Yahoo! Groups Links
> 
> 
>     dmcnews-unsubscribe@xxxxxxxxxxxxxxx
> 
>  
> 
> 
> 
> 
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN