[DML] Turn Signal Question

["Michael & Denise" <luckeys71@xxxxxxx>]

Hi gang,
I'd like to take a moment to thank all of the folks here that have been so generous with their knowledge of the DeLorean which has helped make my experience as an owner an enjoyable and challenging one.  I've had questions on the speedo angle drive, clutch master and slave cylinders, binnacle removal, and many other issues that have been answered through advice from Josh H, Ken K, Dave Sontos, John Hervey, DMC Joe, David T, Bill R, and other regulars on the list which have all aided me tremendously.  This brings me to my current question-I have a nagging problem that started after I reassembled the dash binnacle that hopefully will only require a little trouble shooting.  My right turn signal indicator stays on when the headlights are turned on otherwise if they're off the right turn signal is off and functions normally.  I've checked the wiring underneath to see if there's an obvious problem but I haven't seen anything out of the ordinary.  Has anyone had any experience with anything similar to this when replacing a dash binnacle?  As always any comments or advice would be appreciated as I try and figure out what I could have done to cause this problem.
Thanks again from me to the group as I know I wouldn't be driving this car today without you!
Mike
#3760

[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/