I assume that the door lock here is jammed as well. If so, it's rather simple to fix. Instead of pulling up on the inner handle to open the door, press down on it. While holding it down, unlock the door. Then let go, and pull the handle to open the door like normal. If there is some severe tension on the door from a misadjusted torsion bar, you *might* need to also pull/push the door to keep it closed. I've seen this happen on both my car, and on others. It'll happen when the cable connecting the outer door handle hangs, and doesn't allow the bell crank to fully retract. This will prevent the front door latch from unlocking, and thus the door appears as though it's jammed. The factory did an excellent job at adjusting the inner rods and latches, and they should never need to be readjusted. Unless they are upset, when you install new door handles for instance. In that case you may need to adjust the cable, and or sheath. Make certain they're fully seated, and have no preloaded tension. -Robert vin 6585 "X" --- In dmcnews@xxxxxxxxxxxxxxx, Woody <BePositive2000@xxxx> wrote: > > I'm sure there has been one or several posts on this, but could not > find one. > > My driver's side door has decided to only partially unlatch. How do I > get it to open and prevent it from happening again. This occurred > after I locked the door. > > Thanks, > > Woody > > > > __________________________________ > Do you Yahoo!? > Yahoo! Small Business - Try our new resources site! > http://smallbusiness.yahoo.com/resources/ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/