[DML] Re: Sealed Relays for door lock module?

[tobyp@xxxxxxxxxxxx]

Greg - The original relays inside the lock module are quite under-
rated for the load that the solenoids demand.  We have new 40amp 
relays with the correct pin configuration that will replace the 
originals perfectly.  The relays we currently stock are of the "open 
air" variety, although we can get sealed units with the same 
interfaces and the same load rating.  Please let us know if we can 
help.  Thanks.

Toby Peterson  VIN 2248 "Winged1"
DeLorean Parts Northwest, LLC
www.delorean-parts.com

--- In dmcnews@xxxxxxxxxxxxxxx, "gzapf" <x86Daddy@xxxx> wrote:

> I plan to perform some of the normal upgrades to my door lock 
module, and have seen pointers to use a hermetically sealed, higher 
rated pair of relays to replace the originals.  I'd very much like to 
persue a "fix it once" solution like this, but have no clue as to 
what I'm looking for on that relay.  








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/