Re: [DML] Throttle cable routing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Throttle cable routing





I agree with Dave.   Also, you may need to look at the long, brass-colored 
bolt in the driver's footwell that the pedal mechanism rests on at the top 
of its travel (difficult to describe, but it's obvious when you see it). 
That bolt can be adjusted to set the initial depth of your gas pedal, and 
give you more travel with it.

Just make sure when you adjust your cable that pushing the pedal to the 
floor doesn't over stress the cable, throttle spool, and WOT switch. 
Naturally, it should just reach the WOT position when you've got the pedal 
to the metal.

Jake Kamphoefner
1063

----- Original Message ----- 
From: "Dave Sontos" <dsontos@xxxxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, January 16, 2005 7:10 AM
Subject: [DML] Throttle cable routing


>
>
> By the picture it looks like your cable IS routed correctly. The top mount
> is for the Automatic transmission downshift cable.
>
> Dave Sontos
> Vin 02573
>
> -----Original Message-----
> From: stainlessilusion [mailto:5n-@xxxxxxx]
> Sent: Saturday, January 15, 2005 9:26 PM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: Re: [DML] More problems found (was Piston rings + sleeves)
>
> Now that the car is in the garage and defrosting, I'll be able to
> check everything tomorrow-tonight I just did some more checking around
> and discovered something else... with my gas pedal down all the way,
> the assembly on the engine doesnt open all the way, in fact, it is
> more then an inch away from the full throttle switch! I've gone over a
> few photos and see that the cable is routed differently but I can't
> find the correct routing anywhere in the book. There seems to be 2
> places to screw the cable into, mine is screwed into the back bottom
> spot obviously instead of the top...I've uploaded a picture to show
> how far it was opening...and to imagine-I was driving this car like
> this for months! wonder what it will be like once it is able to
> operate correctly. Anyone know where to find the correct routing??
>
>
>
>
>
>
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
>
> For more info on the list, tech articles, cars for sale see 
> www.dmcnews.com
>
> To search the archives or view files, log in at 
> http://groups.yahoo.com/group/dmcnews
> Yahoo! Groups Links
>
>
>
>
>
>
> 






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated