Re: heater control valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: heater control valve



If you mean the heater core shutoff valve, any 5/8" will do (watch
size of vacuum nipple -- 1/8" or so). I used Factory Air #74612,
stocked by both Autozone and Advance. Differs in appearance from
factory (single piece step down). Is long lived however -- use same
part number on all my Lincolns.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "ablemanse" <s.ableman@xxxx> wrote:
> Hi,
> 
> Somewhere I saw a after market heater control valve but now that I 
> need one I can't find it. Was it a Subaru? I've looked in the archives 
> and saw that someone bought one at NAPA but he didn't say what it was 
> ment for. 
> 
> TIA Steve 1089






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated