Question about window regulators
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Question about window regulators



I have the aftermarket window regulators in mycar (Don't most of us 
by now =) ).

The problem is the attachment screw came out and over time, the lower 
tube that comes out of the motor has become bent so it has worked 
it's way loose. Even though I reconnected the screw and can get the 
tube back in the moor housing correctly, it will only work for a 
short time before the tube is pushed out from the motor housing and 
the window won't go up all of the way and eventually gets all messed 
up again...

My question is this...Does anyone know where I canget just the tube 
that the cable runs through? The rest of it is fine and I hate to 
spend $250 on a whole new setup...

Thanks

Michael 
#2944






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated