RE: [DML] Need Part = little pipe that goes from coupler to slave cylind
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Need Part = little pipe that goes from coupler to slave cylinder



Mine did the same thing. I just took all the pieces to a hydraulic/pipe shop
and they made me a new one with the old fittings. It was only $20.

> -----Original Message-----
> From: steve [mailto:steve@xxxx]
> Sent: Sunday, September 07, 2003 4:28 PM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: [DML] Need Part = little pipe that goes from coupler to slave
> cylinder
> 
> This is very easy to take off, provided your nuts (bolts) at each end
> aren't corroded like mine were. I broke my pipe while tryng to take
> it off - the nut at one side would not turn.





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated