The rpm relay needs a signal from the distributor to activate the relay. No ignition signal - no pumping ! Elvis > I've been looking over the electical diagram today, to no avail. > > John Hervey - seems like this one is right up your alley. > > When my key is the ON position my fuel pump does not charge-up. > Therefor when I turn it to START it THEN primes-up and takes a > little longer to start the engine. I've done some looking. And the > RPM Relay doesn't close in the ON position. BUT once the engine is > started the RPM relay stays closed, and the car runs just fine. > > Looking at the electrical diagram tells me that if in the ON > position, the wiper blades should work too.... they DO! so the > ignition switch is fine... as is the main relay. It's only the RPM > relay that seems not to work in that position. I haven't check the > other companants on the first fuse... I just now thought of that... > but it seem like there is very little to fail between the fuse the > RPM relay... especially considering the RPM relay (and everything > else for that matter) works fine AFTER the key snaps back into the > ON Position from START. > > Confusing enough for ya? Any help?? Anyone? > > > BTW, I finally caught that episode of Monster Garage... Nice job > guys!! Did WAY better than I ever could have done... But Eric took > the fun ride... That jump looked like great fun!! > Also... that One wheeled vehicle on the same show... that was cool. > > Thanks for any help anyone can provide, > James 004009 -- COMPUTERBILD 15/03: Premium-e-mail-Dienste im Test -------------------------------------------------- 1. GMX TopMail - Platz 1 und Testsieger! 2. GMX ProMail - Platz 2 und Preis-Qualitätssieger! 3. Arcor - 4. web.de - 5. T-Online - 6. freenet.de - 7. daybyday - 8. e-Post