Re: [DML] Re: Tuning Idle Speed Circuit.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: Tuning Idle Speed Circuit.
- From: Martin Gutkowski <webmaster@xxxx>
- Date: Sun, 31 Aug 2003 20:19:38 +0100
Volvo and Renault both set up their engines at 1.5%, my DeLorean runs as
sweet as a nut at this.
Martin
Harold McElraft wrote:
CO at less than 1% is too low in my experience; CO2 at 14.1 is too
low also. Try 2% CO. This will probably yield a CO2 reading around
15.0, HC should still be near 0, NO will still be low too. Run and
idle should sinc up and you can still pass an emmissions test with
flying colors.
Harold McElraft - 3354
Back to the Home of PROJECT VIXEN