Re: Replacement MSD Coil
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Replacement MSD Coil



On Tue, 29 Jul 2003 10:02:33 -0400, Hank wrote:

> I'm pretty sure the coil is the problem.
> When disconnected, I'm getting a full 12 volts on the
> two wires that connect to terminal #15 (+) on the coil,
> but that drops to 4.6 volts as soon as I connect them
> to the coil. 

Ehm... Basic physics says that on an OPEN circuit, the
voltage across the gap ALLWAYS is as high as the feed
for the circuit...

Only once you connect ANYTHING in the gap an actual
voltage can be measured on the component...

If you're getting 4.6V over the coil, you're loosing 7.4V
somewhere... What voltage do you get across the resistors?

JAN van de Wouw

Thinking Different... Using a Mac...
Living the Dream... Driving a DeLorean...
Shifting Expectations... Driving a Nissan...

DMC-12 "Dagger" since Sep. 2000
100NX "Saphire" since Nov. 2002
-------------------------------







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated