To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews ------------------------------------------------------------------------ There are 2 messages in this issue. Topics in this digest: 1. RE: windows are screwed up... again... From: Travis Goodwin <tgoodwin@xxxxxxxxxxxx> 2. Replacement MSD Coil From: "Henry" <henry@xxxxxxxxxxxxx> ________________________________________________________________________ ________________________________________________________________________ Message: 1 Date: Tue, 29 Jul 2003 08:38:42 -0400 From: Travis Goodwin <tgoodwin@xxxxxxxxxxxx> Subject: RE: windows are screwed up... again... I had similar problems and yes, the new regulators fixed the problem. > -----Original Message----- > From: Adam 16683 [mailto:acprice1@xxxxxxxxxxx] > Sent: Monday, July 28, 2003 9:39 PM > To: dmcnews@xxxxxxxxxxxxxxx > Subject: [DML] windows are screwed up... again... > > Last year my passenger would not close all the way, the window was > crooked in the slot so when it rolled up the there was a 1/4 inch > open space on the front part of the window. I had took the door apart > and found that the plastic guide clips had come off from the "L" > shaped metal guide rail inside. I put the clips back around the guide > rail and everything was fine until today. Rolled window down, then up > and it was off the track again... > > For more info on the list, tech articles, cars for sale see > www.dmcnews.com > > To search the archives or view files, log in at > http://groups.yahoo.com/group/dmcnews > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ ________________________________________________________________________ ________________________________________________________________________ Message: 2 Date: Tue, 29 Jul 2003 10:02:33 -0400 From: "Henry" <henry@xxxxxxxxxxxxx> Subject: Replacement MSD Coil Yes, I've searched the archives. I've found many posts that mention that people have replaced the Bosch unit with an MSD unit,but nobody ever mentioned a model or part number. Rob Grady said that the MSD 8202 should be a direct replacement for the Bosch Coil, but I'd like to confirm the MSD part number before I go get one. If you have a MSD model number, could you also email me directly, as I'm impatient waiting for the next DML cycle. Thanks. I'm pretty sure the coil is the problem. When disconnected, I'm getting a full 12 volts on the two wires that connect to terminal #15 (+) on the coil, but that drops to 4.6 volts as soon as I connect them to the coil. -Hank ________________________________________________________________________ ________________________________________________________________________ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>