RE: [DML] Re: Thumping suspension
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Re: Thumping suspension



I had a thump in the front which was caused by one of the shock mounting
bolts being loose. The rubber bushing split and fell out.

Scott Mueller
002981
RNDOLA


-----Original Message-----
From: James LaLonde [mailto:deloreandmcxii@xxxx] 
Sent: Monday, May 19, 2003 9:09 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Thumping suspension


> It's hilarious how many times I've scared the bejeevers out myself 
> when I heard a chair/toolkit/whatever sliding around my trunk. Scares 
> me EVERYTIME I put something heavy in there... takes me a few minutes 
> to realize... then I feel dumb all over again.
>
> But, I experienced the sound your speaking of (non-parcel related). 
> Check that both the Sway bar brackets are not broken. Have you 
> installed the recall brackets up there? Are bushing still seated 
> nicely.
> It could be the sound of the bar banging against the frame as you 
> stop braking. (does it happen just when you let of the brakes)
>
> A 'BOING' I found up front was a tie wrap I had used on something up 
> there and hitting the spring and going PING (sounded like a bell).
>
>
> Hope it helps!
> James L 004009





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated