Re: [DML] Porsche Trans
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Porsche Trans
- From: Bob Brandys <BobB@xxxx>
- Date: Thu, 01 May 2003 11:18:15 -0500
Raph,
I put a ZF4HP22E (1989 Porsche) in my Rover V8 DeLorean. It fit the
frame, though you have to make custom mounts.
I had a custom adapter plate made by Kennedy Engineering.
The ZF4HP22HL from 1984 is simpler and less expensive to install because
you don't need a computer to control it.
The Porsche shifter cable is a perfect length. This give you 4 forward
speeds including overdrive. 1st gear is a little lower than the stock
ZF3 in the D so you get a better of the line performance.
BOB
Back to the Home of PROJECT VIXEN