Re: toll booth window solenoids
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: toll booth window solenoids



It is not too technically difficult to replace the window regulators.
When you buy them from one of the "D" venders they can walk you
through the procedure. One thing to be careful about, the inside of
the door has many SHARP edges of stainless steel. The best thing you
can do is to put duct tape over all the sharp edges before you begin
after removing the panels. (You did buy all that duct tape that the
government told you to didn't you?) Well now you have a good use for it!
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, "jevans742003 <nucleus@xxxx>"
<nucleus@xxxx> wrote:
> How hard is it to replace the window solenoids? Is this something 
> best left to DMCH or can any armchair mechanic do it?






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated