RE: [DML] Steering rack replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Steering rack replacement



Hi Knut

I'm curious - did you try removing a couple of adjustment shims to tighten
your old rack before deciding on a replacement? It's not a procedure that's
widely known, and it's not in the manual. If you take off the small cover
over the pinion, there are three or four adjustment shims which push it
down onto the rack more as they're removed.

FYI, the Tie rod ends (called Track rod ends here) are identical to those
off a Triumph herald, and are available, on-line from the following site,
in $US for $14.43 each. International shipping available.

http://www.rimmerbros.co.uk/cgi-bin/rimmer.bat?findpart&PartID==GSJ158

And they look like this

http://www.delorean.co.uk/pictures/DSCN0436_640.jpg

Best Wishes

Martin
#1458
#4426

Original Message:
-----------------
From: ksgrimsr knut.s.grimsrud@xxxx
Date: Thu, 02 Jan 2003 00:09:36 -0000
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Steering rack replacement


I had a chance to replace my steering rack over the holidays and I 
thought I would share my experience with you in the event some of you 
are considering the same procedure.





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated