Re: [DML] Question Re: Taillight Mod
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Question Re: Taillight Mod



Bill

I'm wondering "why?"

If you take the 4 brake lights to be 1 2 3 and 4, I think we've pretty much decided over here that 2 and 3 aren't brake lights anyway. The cluster was designed to include the european-required fog lights. If you look at them, 2 and 3 have a more focused pattern than 1 and 4. They are meant to be switched on when it's foggy, and perhaps you guys aren't used to seeing them but I can guarantee one very quick way to annoy other road users is to drive along with your fogs on when it ain't foggy!

You might like to have a look at my foglight modification, which is required on all UK DeLoreans

www.delorean.co.uk/foglights.html

Retains the use of all 4 lights for braking, but allows 2 and 3 to be switched on independently.

Cheers

Martin
#1458

content22207 wrote:

Am considering following modification this winter:

On rear boards:
Burn positions 2 and 4 as taillights
Burn positions 2 3 and 4 as brake lights
I'd leave boards intact w/ OE single filament sockets -- insert mod
before card edge connectors. Positions 2 and 4 would be switched with
a relay triggered by 3 itself.

My question: would constant burn on 2 and 4 generate too much heat for
the bezels? That may be reason for extra large 3 (and a noticeably
smaller bulb).

Bill Robertson
#5939








Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated