Re: [DML] Brake Calipers, Tie Rod ends, Electrical Parts Source
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Brake Calipers, Tie Rod ends, Electrical Parts Source



--- In dmcnews@xxxx, jwit6@xxxx wrote:
> Here's another new source....www.dmc-service.nl 
> Holland...
> 
>There also is an English page. You can open this page by selecting 
the Union Jack.

If you use other calapers in the front than the originals, you have a 
problem because they lock up first. The only way to fix this problem 
is to install a brake pressure switch who seperates the front and 
rear brakes.
If you use other calapers on the original front rotors they will be 
overheated. 
If you want more brake power whitout less heat with the original 
rotors, we sell soft compound brake pads. These are especially 
designed for this cause: more brake power, less heat.

If you have any questions, email me privately (ed@xxxx)

www.dmc-service.nl






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated