Re: [DML] Pivot Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Pivot Bolts



> I have taken the nuts off the end of the pivot bolts, however they just
won't come out. Does the Split spacer (100481) grip them in any way?

No. I had to remove the bottom pivot bolts when I replaced my shock
absorbers. My experience was that the weight of the assembly hanging tended
to put sheer force on these bolts which made them harder to get out. I
ended up putting a floor jack under the hub carrier to left it up enough to
relieve the tension. Then to put things back together I needed the jack
again to get the holes to line up.

Walt Tampa, FL






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated