Daniel, The brake handle attaches through the floor. Remove the four(?) nuts from under the car and the whole assembly lifts right up. There should also be a wire attached to it for the emergency brake light on the dash. By the way the seat has only four nuts holding it in place so it is very easy to remove, makes working on the car easier sometimes when you take the seats out. Just remove the four nuts under the floor. Dave Sontos vin 02573 ----- Original Message ----- From: "dmc24000" <delorean@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Thursday, January 10, 2002 5:50 PM Subject: [DML] Parking brake handle disconnected... > I just bought my first DeLorean. It has only 24,000 miles on it. It > has always been garaged and is in excellent condition. However, the > two parking brake cables that connect to the parking brake handle > inside are disconnected. I've fixed this type of problem on other cars > before, but when I started to dig into this problem it looks like I > have to take out the driver's seat to remove the bracket to reconnect > the two cables. IS THIS RIGHT. It seems a bit excessive, but I can't > see any other way to fish the cables back on to that bracket with the > two slotted holes. Also, I am left to wonder why it would have come > off in the first place. The cables and the crimped-on cable ends are > intact, and the bracket holes don't look oversized. Any help would > be appreciated. Thanks... > > Daniel (Proud Owner) > VIN 10920 > > > > To address comments privately to the moderating team, please address: > moderator@xxxx > > To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >