Re: [DML] Fuel pressure at the injectors?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Fuel pressure at the injectors?



Eric, Run some Berrymans B12 through the system or a tank of gas then come 
back and recheck the spray pattern. Unless you have some bad injectors, they 
all get gas at the same time and under the same pressure. Unless there is 
something blocking. You can also take an injector that isn't giving a good 
spray pattern and swap it out with a line that the injector is spraying good, 
and that way you can tell if there is still blockage in the slits of the 
control plunger tube or trash in the injector screen.
John Hervey
http://www.specialtauto.com/






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated