Eric, Make sure your system pressures are correct first (65 psi). If they are then the leaking injectors must be replaced. The definition of a leaking injector is "If a drop forms, falls from the tip of the injector and is replaced by another drip." High System Pressure is usually a result of a plugged return line or inoperative system pressure regulator inside the fuel distributor. Dave Sontos vin 02573 ----- Original Message ----- From: "Eric" <ericp@xxxx> Subject: [DML] Fuel Injector Question > Now comes the question - with the air sensor plate not deflected, and > the fuel pump still running; I noticed each injector is DRIPPING. Eric