Re: DMC How are the fuel injector suppose to work in this system?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DMC How are the fuel injector suppose to work in this system?



There were 2 different engines in the Eagle Premier. The Z7X-711 and 
the Z7X-715. The injectors I'm using are the same ones that are in in 
the Z7X-715. Using the Eagle intake would require a rework on the 
throttle cable and pully, and the use of the Eagle throttle body 
intake plumbing/air filter etc...at the minimum. Also the injector 
ports may be located in the intake manifold on the Eagle. In which 
case the CIS ports in the Delorean, which are located in the heads 
themselves would have to be plugged. It would be nice to find out if 
the intake itself would bolt up. Wouldn't that be nice...
Jim

--- In dmcnews@xxxx, "Jim Reeve" <ultra@xxxx> wrote:
> Does anyone know if it would be possible to use the fuel rails 
> w/injectors from an Eagle Priemier engine, or would they interfere 
> with the DeLorean's intake manifold? And if thats the case, would 
it 
> be possible to use the intake manifold from the Priemer engine as 
it 
> appears to be a bit more refinded than the DeLorean's?
> 
> Jim Reeve
> MNDMC - Minnesota DeLorean Club
> DMC-6960
> 







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated