Re: [DML] a/c pulley bearings bad design
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] a/c pulley bearings bad design



Walt,

I may get flamed for saying this, but you may be better off leaving the
pulley off and getting a shorter belt. I had the same problem and actually
once, the pulley just flew off the car! I replaced the pulley 3 times
before I decided to just leave it off. I just got a shorter belt to
compensate for the missing pulley and I never had any problems.


Hope this helps,


Duke
www.geocities.com/at88mph_1999

----- Original Message -----
From: "Walter" <Whalt@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>


> I am complaining about the a/c pulley bearings on my DeLorean. I replaced
> them about 7K miles ago, and the lower one went bad again!






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated