Re: [DML] oil pressure light sender
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] oil pressure light sender



I have changed two oil senders so far, and it isn't easy finding something
that fits. I could not find a 23mm socket anywhere -- NAPA, Snap-On, Pep
Boys, Discount Auto, Sears, etc. I ended up using a slightly larger size
American socket. The fit wasn't perfect, but it was good enough. It's been
a while, so I don't remember if I used a swivel extension or a straight one.
On one of the cars I did, some thick nasty looking oil gushed out when I
removed the sender, so watch out. I was ready for it on the second car, and
barely anything dripped out. I had the oil drained on both motors, too.

Walt Tampa, FL

----- Original Message -----
From: <Soma576@xxxx>
<snip>
> today i tried to put a new oil pressure sender in because my original one
is
> leaking a little oil. but i can't get a socket (23 mm), wrench, pliers,
> anything on it enough to turn it. the catalytic converter and muffler
bracket
> are in the way!!
<snip>







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated