RE: [DML] oil pressure light sender
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] oil pressure light sender



Andy i put in a new oil pressure sender this summer. I remember it being a
tight fit in there but it is possible to get a socket in there. Just get
creative with universals and extenstions, and take your time. It may turn
only a quarter of an inch each time, but eventually it will come out.

Hope that helps
Willie
Vin 5043

-----Original Message-----
From: Soma576@xxxx [mailto:Soma576@xxxx]
Sent: Wednesday, September 05, 2001 1:30 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] oil pressure light sender


hey all,

today i tried to put a new oil pressure sender in because my original one is
leaking a little oil. but i can't get a socket (23 mm), wrench, pliers,
anything on it enough to turn it. 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated