RE: [DML] door dings caused by window regulator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] door dings caused by window regulator



You can check out the $5.00 fix at
http://stainlesssteel.freeyellow.com/index.html

Thanks for asking,
Robert Starling
Vin#5252

-----Original Message-----
From: John L. Rahn [mailto:john_rahn@xxxx]
Sent: Wednesday, June 20, 2001 10:23 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] door dings caused by window regulator


Robert,

What is the $5.00 fix?

Thanks,

JR

--- In dmcnews@xxxx, "Doc" <doctor280@xxxx> wrote:
> I have not seen any dents like you are describing on any of the
Deloreans
> that I have looked at. I am still using the original regulators
that have
> been updated with my $5.00 fix. (2 years and still going strong) I
have been
> inside the doors of a few Deloreans and I have never come across
one that
> showed any signs that the regulator was making contacted with the
door. And
> just another thought, the new regulators mount the same as the
originals. I
> am really at a loss how you are getting that dent in that location.
The
> glass window, keeps the regulator secure at the top and the motor
is bolted
> to the bottom of the door. There is only the cable housing and the
> cable,(that runs inside the housing)that is located at the center
of the
> door.
>
> Robert Starling
> Vin#05252



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated