RE: [DML] Vinyl Door molding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Vinyl Door molding



Make sure both surfaces are clean of any old adhesive
before using the Emblem Adhesive. 3M also makes an Adhesive
Remover that is excellent. It helps to use a length of
masking tape on the body panel to act as a guide when
reattaching the rub strips.

Mike

-----Original Message-----
From: DMC Joe [mailto:dmcjoe@xxxx]
Sent: Tuesday, June 19, 2001 1:43 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Vinyl Door molding


The body moldings, called rub strips, are sold with an adhesive backing, and
can be peeled off for service or replacement. If you are re attaching a
previously installed strip use 3M Emblem Adhesive, follow the directions for
professional results.







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated