Re: [DML] Cold Galvanizing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Cold Galvanizing



I will attest to the effectiveness of this product. The only caveat is that
you need to apply it to clean metal. It is tolerant of residual rust but
the old epoxy must be removed. I stabilized an old Bug Eye Sprite
throughout the frame by building a spray tip on the end of a flexible tube
and inserting it into all the frame tubes that were rusting from the inside
out. 15 years later not a sign of rust and these were areas where no prep
(and no old paint) was present and rust was having a field day.
I also use it on boat trailers that are exposed to salt water and have
excellent results. WW Grainger sells a similar product: Stock # 5W180 in a
spray can for $7.70/can. www.grainger.com

Donald L. Ekhoff


----- Original Message -----
From: "Capt'n Mike" <allsun@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, June 06, 2001 2:10 PM
Subject: [DML] Cold Galvanizing


> As a manufacturer of large equipment for the US Navy I can testify to the
> effectiveness of Cold Galvanizing. 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated