Robert, Try this first step to release your door lock. Locate the exterior door handle cable where it attaches to the latch release link bell crank which is located just above the interior door release handle. Push the bellcrank back to allow you to detach the cable ball end from the bellcrank. Check to see if the lock releases. Let me know the result. DMC Joe "We're here to help you" DMC Help / De Lorean Services / <dmchelp@xxxx> Web Site: <www.deloreanservices.com> ----- Original Message ----- From: DMCVegas@xxxx To: dmcnews@xxxxxxxxxxxxxxx Sent: Saturday, May 05, 2001 4:04 PM Subject: [DML] Stuck passenger door. My passenger door now has decided not to open. The upper trim panel is off, and when pulling either the internal or external door handle, it does appear that all of the connecting rods are working correctly. However, the door will not unlock. When pushing the lock down, or turning the key on the outside, the door refuses to unlock. Everytime I turn the key into the fully unlocked position, it just snaps back into place without unlocking. The door doesn't appear to be jammed, it just won't unlock! I can see the white plastic pieces in the door that connect to the locking mechanism, and they both turn freely with no trouble. To give a better idea, both of my doors have guide blocks installed, and the power door locks were disabled a long time ago. I am no longer scratching my head over this. I'm pulling my hair out! -Robert vin 6585 [Non-text portions of this message have been removed]