Re: [DML] Oxygen Sensor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Oxygen Sensor



You may need to adjust the CO mixture.

----- Original Message ----- 
From: Chris C <petleech@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, January 01, 2001 1:52 PM
Subject: [DML] Oxygen Sensor


> We are checking the operation of our oxygen sensor using a dwell 
> meter as described in the manual. The dwell meter we have has ranges 
> for six and eight cylinder engines. Inasmuch as this meter was 
> designed for setting old fashioned point ignition do we need to use a 
> multiplier on the guage reading to get an accurate dwell angle for 
> the Lambda system? With the car warm, on the eight cylinder scale we 
> are getting readings of 10-12 degrees. We understand the normal 
> reading should be 35-45 degrees. 







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated