Re: Idle Speed ECU.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Idle Speed ECU.



Robert, The two pins your talking about are just support pins. Why 
they arn't on the board I don't know but that all they are. As far as 
the oxidation, I see a lot of that due to climate. Clean it off with 
a little lighter fluid ( Naptha ) and a tooth brush.
John


--- In dmcnews@xxxxxxxxxxx, "Robert Rooney" <DMCVegas@xxxx> wrote:
> I posted into the vault the 2 photos of my Idle Speed ECU. On the 
one 
> chip on the bottom you can see that 2 of the pins on the IC are not 
> soldered into place. Is this supposed to be this way? Even on some 
of 
> the empty connections on the board they took the time to apply 
> solder, so I have no idea as to why they would leave 2 
pins "naked". 
> Is this normal?
> 
> -Robert
> vin 6585 (The DeLorean from hell.)






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated