Re: [DML] Installing ignition dist
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Installing ignition dist



David,

If you have a DeLorean workshop manual you will find the information on the
proper procedure for the removal and replacement of the ignition distributor
at M:07:01. If you need additional information or a copy of the section
mentioned contact us directly.

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message -----
From: <Delorean17@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Tuesday, October 03, 2000 7:40 PM
Subject: [DML] Installing ignition dist


> Hello,
> I am fixing up a DeLorean which sat outside for a long time. I am
> getting ready to install a new ignition distributor and was wondering if I
> have the right idea. I am not that much of a mechanic and have never done
> this before, I just want my car to run again!
> Do I get the # 1 firing cylinder in the firing position and have the
> distributor rotor ponted at the small mark on the inside of the
distributor
> housing? and then put the cap on it? question, How do I get the #1
cylinder
> in the correct firing position? what number should the mark on the pulley
> line up with? also, do I know what I am doing? its very possible I don't.
> please let me know if that is the case and tell me the correct way:)
email
> me privately.
> Thanks
> David







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated