Re: [DML] Angle drive lubrication
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Angle drive lubrication



I'd be inclined to think that 90 weight oil added at the frequency you've
been doing will find it's way into the speedometer head sooner or later and
cause a mess. I use a grease gun ( the same grease I lube the chassis with)
with a finely pointed adapter ( available at autostores ) to shoot a bit of
grease into the hole opened up by removing that small screw on the underside
of the drive. I do it about twice each summer or every 5,000miles. It seems
to work as my speedometer is still going.

Bruce Benson


> What's the best way to lube the angle drive? I've been following the
> original factory service bulletin and filling it with 90w gear oil at each
> oil change. > >
> Thanks
>
> Mark N
> VIN 6820
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated