cooling problem!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

cooling problem!



hi everyone.. today i replace 3 of my coolent hoses
around the engine. I replaced the hose going to the
coolent bottle, the hose going into the water pump and
the hose going out of the pump. Now when i took off
the old ones coolent came rushing out. I assume it was
not all of it. I put the hoses back on and filled the
coolent bottle to the max line, the coolent bottle
didnt drain into the hoses very much it just filled
the bottle and sat. I turned on the car and let it
run for a while.. my temperature started to raise and
no fans kicking on, also the level in the bottle did
not lower. So if i let it run it would eventually
overheat. What am i doing wrong? Helpppp!

-Cliff Andrews

__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated