Re: [DML] epoxy rear fascia bolts?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] epoxy rear fascia bolts?



I had the same problem with mine. Don't use anything else but two part urethane
epoxy and make sure you use stainless steel hardware.

Delorean17@xxxx wrote:

> Hello List,
> I mentioned this once before but I never got around to doing it. 5 of
> the 7 bolts along the bottom of my rear fascia are snapped off. I am going
> to be putting it back on this weekend when my rear closing panel comes. some
> said to drill all the way through the fascia and just put bolts there. I
> really dont want to do that.
> If I go buy studs at the hardware and grind the broken fascia bolt flat
> is there a strong enough epoxy that will hold the studs on?(brand name?) I
> would really like to do that If I can.





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated