[DML] Re: removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: removal



Erik,


Its pretty straight forward. There are 4 bolts and one c clamp that hold on
the cat. Before you remove the cat, soak these with some penetrating oil or
WD40 and let it sit overnight. If yours is like all the other DeLoreans,
it'll be rusty. I used an impact wrench to get mine off. Then remove the c
clamp and wiggle it back and fourth until you get it off. Before you do
anything major though, order a gasket from one of the DeLorean suppliers
because you won't find it locally.


Hope this helps,

Duke

----- Original Message -----
From: Erik Geerdink <delorean502@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Tuesday, March 21, 2000 1:51 PM
Subject: [DML] removal


> Hi,
> Hopefully I won't start any bad discussions by posting this, but could
> someone tell me the procedures of removing the Catalitic Converter?
> Please don't post to the DML on how this shouldn't be done, those posts
> have pasted thru not to long ago.
> Thanks for the help
>
> Erik
> 4512
>
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
> -- Easily schedule meetings and events using the group calendar!
> -- http://www.egroups.com/cal?listname=dmcnews&m=1
>
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated